Legally sound certification:
Free Claim CheckProduct Content Microplastic-Free
Not by looking at the product. Microplastic cannot be seen, smelled or tasted. It can only be detected in the laboratory, in a sample of the finished product. That is exactly why a claim such as “microplastic-free” needs independent proof.
A list of ingredients or a formulation shows what a manufacturer deliberately puts into a product. The laboratory analysis, by contrast, examines the product as actually manufactured. It also picks up inputs that do not follow from the formulation. That is the difference between a self-declaration and an independent certification: the brand promise is checked against the real product.
Which method fits depends on the product. Chewing gum is a special sample because it is designed not to dissolve while being chewed. A thermoanalytical method such as TED-GC/MS is suitable here. The sample is heated in a controlled way, and the resulting gases are separated and analysed. Certain plastics leave a characteristic chemical fingerprint, and reference standards make it possible to determine how much of a polymer is present. In short: heat, separate, identify, quantify.
The tasks are separate. flustix sets out the requirements in the published certification scheme. An independent testing laboratory analyses the sample. An independent certification body assesses the results and decides on the certificate. Regular surveillance follows during the term of the certificate.
For Forest Gum chewing gum, the laboratory Currenta examined a representative sample, the Cassis Minze variety, by TED-GC/MS for defined synthetic polymers. None of them was detected, and the reported total was below 0.1 per cent by weight. TÜV SÜD assessed the result against the flustix certification scheme and issued the certificate, which is publicly available under FPMT022. The full story is in the article Chew on this.
This is how a manufacturer statement becomes verifiable proof: defined requirements, laboratory analysis of the actual product, independent assessment and regular surveillance.
Last reviewed: November 2026
Sources: flustix certification scheme Product Content Microplastic-Free, edition of 24 September 2025 · DIN/TS 10068 (food, determination of microplastics)
Editorial responsibility: Malte Biss, CEO & Founder of flustix